Loading... Please wait... Loading... Please wait...
No through bolts are exposed resulting a very clean, modern look
Made from high-grade stainless steel, our modern handles are easy to care for, resistant to corrosion and environmental influences, and suitable for interior and exterior applications
Built using heavy-guage die cast case, the latch features high strength steel compression springs for long life & durability. Residential and ommercial applications
Some models do require specified handing direction
For product details please reference the specifications in the link below
"Backset" refers to the distance from the center of the bore (drilling) to the edge of the door. Both US and Euro lever sets are available with either a 2 3/8" backset (standard) or 2 3/4" backset.
NOTE: Backset dimension MUST be specified.
Example A:
"Strike Plate" refers to the decorative jamb mounted receiver where the latch first makes contact.
Lever sets are provided with a "T- Strike" (standard)
NOTE: a "Lip Strike" may be substituted for Both US and Euro lever sets.
Our modern lever sets and deadbolts have a 3 piece rosette technology. We use a steel (not plastic!) sub rosette and the outer rosette screws on (not a clip on!) ensuring a precise grip to the door without any visible screws or holes.
"Rosette" refers to the decorative washer connecting the knob or lever to the door.
Select from the larger 2 9/16" (RD) rosette or smaller 2 3/16" (RA,RM,RJ) rosette.
2 9/16" (RD & RS) rosette:
US lever sets are assembled with the 2 9/16" diameter rosette; this option is ideal for pre-bore (pre-drilled) door slabs. [Example A]
We always say that if you clean your levers, (just like cleaning your car) you can prolong the finish and the life of the lever for as long as you own your home. We only use high quality stainless steel for our levers. SDH.com recommends using stainless steel cleaner at least once a month to take off any residue that may accumulate on the levers. SDH.com offers stainless steel cleaner. If you do not have any stainless steel cleaner, use hot soapy water. Please NEVER use any harsh chemicals, chlorine, bleach etc… Harsh chemicals will ruin stainless steel almost immediately.
Lever sets are available as "Passage", "Privacy", or "Dummy".
US Lever Sets
“Passage” function - is suitable for doors that do NOT require a lock
Example: closet, laundry
“Privacy” function - is suitable for doors that DO require a lock
Example: powder room, bedroom
NOTE: US lever sets are equipped with a decorative push pin on the rosette.
“Dummy” function is used for doors that do NOT require a functioning latch
Example: utility closet
All of our modern door levers, handles, and knobs are reversible. You do not have to specify right or left when choosing between a passage (PAS), privacy (PRI), or dummy (DUM) set. The key component is the latch which has a rotating head to allow for a right or left hinged application.
"Rosette" refers to the decorative washer connecting the knob or lever to the door.
Select from the larger 2 5/8" (UER) rosette or smaller 2 1/16" (TER) rosette.
2 5/8" (UER) rosette:
US lever sets are assembled with the 2 5/8" diameter rosette; this option is ideal for pre-bore (pre-drilled) door slabs. [Example A]
2 1/16" (TER) rosette diameter:
Euro lever sets are assembled with the 2 1/16" diameter rosette; this rosette requires a smaller diameter, multi-point bore (drilling). [Example. B]
Note: Euro lever sets are also available with 2 1/16" squared rosette.
The last 2 digits of the lever product model number refers to the color/finish [Example: UER 37 71].
71 - Satin stainless steel (compared to to US 32D).
72 - Polished stainless steel (compared to US 32).
73 - Combination finish satin/polished (compared to US 32D / US 32).
NOTE: Finish options are not available for all models.
Both US and Euro lever sets are available as "Passage", "Privacy", or "Dummy".
US Lever Sets
“Passage” function - is suitable for doors that do NOT require a lock.
Example: closet, laundry
“Privacy” function - is suitable for doors that DO require a lock.
Example: powder room, bedroom.
NOTE: US lever sets are equipped with a decorative push pin on the rosette.
“Dummy” function is used for doors that do NOT require a functioning latch.
Example: utility closet
Euro Lever Sets
“Passage” function - is suitable for doors that do NOT require a lock.
Example: closet, laundry
“Privacy” function - is suitable for doors that DO require a lock.
Example: powder room, bedroom
NOTE: Euro lever set's thumb-turn privacy bolt is positioned beneath the lever.
“Dummy” function - is suitable for doors that do NOT require a latch.
Example: utility closet
"Backset" refers to the distance from the center of the bore (drilling) to the edge of the door. Both US and Euro lever sets are available with either a 2 3/8" backset (standard) or 2 3/4" backset.
NOTE: Backset dimension MUST be specified.
Example A:
"Strike Plate" refers to the decorative jamb mounted receiver where the latch first makes contact.
Both US and Euro lever sets are provided with a "T- Strike" (standard).
NOTE: a "Lip Strike" may be substituted for Both US and Euro lever sets.
"Rosette" refers to the decorative washer connecting the knob or lever to the door.
US lever sets (UER) available only as round 2 5/8" diameter rosette.
Euro lever sets (TER) available as either round 2 1/16" diameter or square 2 1/16" rosette.
Entry Sets require either a right or left handing be indicated. Reference the handing diagram to specify.
The keyed alike selection is for any deadbolt (or entry Set) that you want to use the same key for multiple deadbolts (or Entry Sets).
The keyed separate selection is for any deadbolt (or Entry Set) that does not need to use the same key for the other deadbolts (or Entry Sets).
Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.
EZ 1060 = Back to back mounting for wood, metal or Polyvinyl Chloride (PVC) doors. This mounting includes through bolts that will connect each pull from both sides of the door to give it a tight and secure fitting.
EZ 1061 = Back to back mounting for glass doors. This mounting includes through bolts that will connect each pull from both sides of the door to give it a tight and secure fitting.
EZ 1062 = One sided mounting with a cap on the back side for glass doors. This mounting is great for applications where you only want to have a pull on one side of the glass door, and it will stay tight and secure with the flat mounting cap on the back side.
EZ 1063 = One sided mounting with secret face application for wood doors. This mounting is great for applications where you want to have a pull on one side of the wood door, and have nothing showing on the other side of the door.
EZ 1064 = One sided mounting with secret face application for PVC doors. This mounting is great for applications where you want to have a pull on one side of the PVC door, and have nothing showing on the other side of the door.
EZ 1065 = One sided mounting with cap on the back side for wood doors. This mounting is great for applications where you only want to have a pull on one side of the wood door, and it will stay tight and secure with the flat mounting cap on the back side.
EZ 1066 = One side mounting with no rosette on the back side. This mounting is engineered to have a minimal bolt through application. The back side of the door only has a screw, and no rosette to minimalize the look of the mounting screw.
Some pull bar models have more than one length to choose from. The length given, is the over length of the pull bar. Please see the product details to learn more about complete dimensions.
The privacy function for the pocket pull has a thumb turn on the inside, and a safety slot on the outside. A coin or flat surface can be used to unlock the pull from the outside for emergency access. The passage function is blank on both sides. You would use this function if your pocket door does not need to lock.
All entry sets come with a satin stainless steel long plate. There is no option for any other finish.
Single Cylinder Deadbolt: This is the typical application for a single entrance set where there is a keyed deadbolt on the outside, and a thumb turn on the inside.
Passage: This option has a solid plate on both sides. There is no deadbolt for the passage function.
Dummy: This option has a solid plate and the lever is nonfunctioning. You would use this on the inactive door to a double door application.
Patio: This option has a solid plate on the outside, and a thumb turn on the inside. This is typically used on patio doors where there is no need to have a keyed deadbolt on the outside.
)
